Terms & Conditions



No salesperson is authorized to bind Seller to any promise or understanding not expressed herein.


All prices are subject to change and shall be mutually agreed to by the parties in the event of any changes in cost of materials or labor, specifications, quantities, delivery schedules, customs duties, other factors beyond Seller’s control, or in the event of delays caused by Buyer or Buyer’s instructions, or failure of the Buyer to give Seller adequate information. Prices payable by the Buyer shall be subject to an increase upon mutual agreement by the parties in the form of a fully executed amendment or modification to the order, should the Seller, as a result of governmental action or regulation including, without limitation, those contemplated by an investigation under Section 232 of the Trade Expansion Act of 1962 (19 U.S.C. §1862) or those contemplated by an investigation under Section 301 of the Trade Act of 1974 (19 U.S.C. §2411), incur additional duties, tariffs or restrictions on products sold hereunder, or on the raw materials that are used in making such products. In no event shall prices include any amounts imposed on the Buyer in connection with Buyer’s purchases from Seller, such as taxes, including but not limited to Value Added Tax (VAT) or excise taxes, duties, tariffs, or any other costs assessed against the Buyer by a governmental authority. Without limiting the foregoing, all prices are subject to adjustment upon prior mutual agreement between the parties, in writing, at any time prior to shipment in the event that the prices or costs related to any component, materials, parts, or commodities utilized in the Products or Services have increased following the acceptance of any Order for any Products or Services (a “Component Adjustment”). Any Component Adjustment, as determined by mutual agreement, shall be reflected in the invoice for Products or Services that is transmitted from Seller to Buyer in accordance with the terms and conditions hereof. Without limiting the foregoing, all prices are subject to adjustment upon mutual agreement by the parties, in writing, at any time prior to shipment due to increases in inflation occurring following the acceptance of any Order for any Products or Services (an “Inflation Adjustment”). The Inflation Adjustment for any Products or Services shall be made by multiplying (a) the ratio obtained by dividing the (i) Consumer Price Index (CPI) in place at the time of invoice by (ii) the Consumer Price Index (CPI) in effect at the time of acceptance of an Order time(s) (b) the price or cost for any applicable Products/Services as set forth in the Order. Any Inflation Adjustment, as determined by mutual agreement between the Seller and Buyer in writing, shall be reflected in the invoice for Products or Services transmitted from Seller to Buyer in accordance with the terms and conditions hereof.


A. Delivery dates are approximate and are dependent on prompt receipt by Seller of all necessary information. Seller may deliver all or any part of Products/ Services as early as 30 days in advance of agreed schedule. The point of delivery shall be "FCA Origin" Seller’s designated factory (INCOTERMS2020), unless otherwise specified by Seller. Upon delivery, title to Products and all risk of loss or damage thereto shall pass to Buyer. Where Buyer notifies Seller that it cannot take timely delivery of the Products, Seller may place such Products in storage, at the risk of Buyer, and Buyer shall reimburse Seller for all expenses incurred in connection with such storage. Buyer shall dispose of the packing materials for Products at its own expense, and shall defend, indemnify and hold harmless Seller from any legal obligations in connection with such packing waste.

B. Acceptance shall be accomplished using Seller’s applicable test procedures or, in Seller’s discretion, in accordance with specific procedures Seller develops in cooperation with Buyer. If installation is not included in Seller’s Scope of Work, acceptance tests will be conducted at Seller’s plant. If Buyer’s order specifies source inspection, Seller will give Buyer at least seven calendar days’ notice of the date of the factory acceptance testing. If installation is included in Seller’s Scope of Work, acceptance shall occur at the installation site upon reasonable demonstration of the applicable test procedures or if the Product is otherwise operating according to specifications. Non-conforming claims must be made in writing with ten (10) calendar days after Seller’s completion of acceptance tests or Buyer’s inspection, or the Product will be considered accepted. Buyer shall be obligated to accept and not reject any Product that is operating according to specifications. If mutually scheduled installation is delayed by Buyer for more than thirty (30) calendar days after the schedule date, Buyer shall be deemed to have accepted the Product on the thirty-first (31st) day after the schedule date.


A. The term of payment shall be net 30 days from date of Seller's invoice, unless otherwise specified. Payments shall be made by Buyer without any deduction or set-off. Unless otherwise agreed, payment shall be made in U.S. dollars. Seller may charge late payment fees at the rate of 1.5% per month, or the highest rate permitted by law, whichever is less, accruing daily.

B. If the financial condition of Buyer is unsatisfactory to Seller, Seller may require full or partial payment in advance, or satisfactory security, in the form of a letter of credit or otherwise. In the event of bankruptcy or insolvency of Buyer, Seller may immediately cancel any Order then outstanding.

C. Buyer grants Seller a purchase money security interest in Products located in the United States, or Services, as well as any proceeds, for the purpose of securing the obligations of Buyer hereunder. Buyer authorizes Seller to execute on Buyer’s behalf and file such financing statements as Seller deems appropriate to perfect and notify Buyer’s creditors of Seller’s security interest.


In the event of any change to the scope, schedule, or other provisions of an Order requested by Buyer and accepted by Seller, price and consideration will be equitably adjusted to reflect other costs or obligations incurred by Seller as a result of changes agreed to between Seller and Buyer. Changes to any Order shall be effective only to the extent a signed writing by Buyer and Seller evidences agreement to such changes. In the event Seller does not agree to any change requested by Buyer, such change request shall not be effective. Seller reserves the option to make changes to Products or Services and deliver a different, superseding, or new model, part, or version number if the replacement has at least equivalent functionality and performance. No Order may be terminated in whole or part without Seller’s prior express written consent, which consent shall be in Seller’s sole discretion.


A. Buyer shall not make any disposition of the Products, by way of transshipment, re-export, diversion or otherwise, except as applicable U.S. export laws and regulations may expressly permit, and other than in and to the ultimate country of destination specified on Order(s) or declared as the country of ultimate destination on Seller's invoices or in the End Use Statement that Buyer supplies Seller. Seller shall not be named as shipper or exporter of record or U.S. principal party-in- interest (USPPI) unless specifically agreed to in writing by Seller in which case, Buyer shall provide Seller with a copy of the documents filed by Buyer for Export clearance purposes. At Seller’s request, Buyer shall supply end-use and end-user information to determine export license applicability. Failure of Buyer to comply with this section shall constitute a material default allowing Seller to cancel related Order(s) without liability.

B. Buyer warrants that it shall not violate or cause the Seller to violate the U.S. Foreign Corrupt Practices Act of 1977 (FCPA), as amended, the United Kingdom Bribery Act (UKBA) of 2010, as amended, or their respective implementing regulations in connection with Buyer’s sale or distribution of the Products and/or Services, and that Buyer does not know or have reason to believe that any consultant, agent, representative or other person retained by Buyer in connection with the sale and/or distribution of Products/Services has violated, nor caused Seller to violate the FPCA and/or the UKBA. Where Buyer learns of or has reason to know of any violation of FCPA and/or or UKBA in connection with the sale or distribution of Products/Services, Buyer shall immediately advise Seller.

C. Buyer further warrants that Buyer shall not violate or cause Seller to violate the U.S. Antiboycott Provisions of the U.S. Export Administration Regulations issued pursuant to the U.S. Export Administration Act of 1979, as amended, in connection with Buyer’s purchase of Products/Services and that Buyer shall not request or require Seller to make statements or certifications against countries that are not subject to boycott by the U.S.

D. Buyer shall not facilitate tax evasion or fail to prevent tax facilitation in the UK or other countries in accordance with the requirements of the UK Criminal Facilitation Act (UKFCA).


A. Seller warrants that Products manufactured by Seller, when delivered, shall be free from defects in material/workmanship. Seller warrants that Services shall be performed in accordance with generally accepted industry practice. Seller's obligations under this warranty shall be limited exclusively to repairing or replacing, at Seller's option, any part of Products which, if properly installed, used, and maintained, proved to have been defective in material or workmanship within 1 year from the date of shipment, or re-performing the Services. Seller warrants for a period of 1 year from the date of shipment that software or firmware, when used with Products, shall perform in accordance with Seller’s published specifications. Seller makes no warranty, express or implied, that the operations of the software or firmware shall be uninterrupted or error- free, or that functions contained therein shall meet or satisfy the Buyer’s intended use/requirements. Buyer shall notify Seller of any defect in the quality or condition of Products (including software/firmware) or Services within 7 days of the date of delivery or performance, unless the defect was not apparent on reasonable inspection, in which case, within 7 days after discovery of the defect. If Buyer does not provide such timely notification, it shall not be entitled to reject Products (including software/firmware) or Services, and Seller shall have no liability for such defect. If the Order is for services on or for any Products previously accepted by Buyer (“Repair Services”), then the warranty period for such Repair Services shall be ninety (90) days after the completion of such Repair Services.

B. Seller's warranty obligations shall not apply to Products which (1) have been altered or repaired by someone other than Seller, or (2) have been subjected to misuse, neglect, or improper use or application, or (3) are normally consumed in operation, or (4) have a normal life inherently shorter than the warranty period stated therein. No Products may be returned unless authorized in advance by Seller, and then only upon such conditions to which Seller may agree. Buyer must obtain a Return Material Authorization (RMA) number from Seller prior to any return shipment, and such RMA number must appear on the shipping label and packing slip. Buyer shall be responsible for returned Products until such time as Seller receives the same at its facility, and for all charges for packing, inspection, shipping, transportation, or insurance associated with returned Products.

C. This section VI sets forth the exclusive remedies and obligations for claims based upon defects in or nonconformity of Products/Services, whether the claim is in contract, warranty, tort (including negligence of any degree or strict liability) or otherwise. THE FOREGOINGWARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, WHETHER ORAL, WRITTEN, EXPRESS, IMPLIED OR STATUTORY. NO IMPLIED OR STATUTORY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULARPURPOSE SHALL APPLY. 


If Buyer receives a claim that Products, or part thereof manufactured by Seller infringes a patent, Buyer shall notify Seller promptly in writing and give Seller information, assistance, and exclusive authority to evaluate, defend and settle such claim. Where Buyer has furnished specifications/designs for the manufacture of the allegedly- infringing Products, Buyer shall defend, indemnify, and hold harmless Seller against third-party claims for infringement arising out of Seller’s use of such specifications/designs.


A. The total liability of Seller on any claim, whether in contract, tort (including negligence of any degree and strict liability) or otherwise arising out of, connected with, or resulting from the manufacture, sale, delivery, resale, repair, replacement, or use of any Products/Services, shall not exceed the price allocable to the Products/Services or part thereof which gives rise to the claim. IN NO EVENT, WHETHER AS A RESULT OF BREACH OF CONTRACT, WARRANTY, TORT, (INCLUDING NEGLIGENCE OF ANY DEGREE, STRICT LIABILITY OR PATENT INFRINGEMENT) OR OTHERWISE,SHALL SELLER, ITS AFFILIATES, SUBCONTRACTORS, OR SUPPLIERS BE LIABLE FOR ANY LOSS OF PROFIT OR REVENUES, LOSS OFUSE OF THE PRODUCTS OR SERVICES, OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COSTOF SUBSTITUTE GOODS, FACILITIES, SERVICES OR REPLACEMENT POWER, DOWNTIME COSTS OR CLAIMS OF BUYER'S CUSTOMERS FOR DAMAGES OR FOR ANY SPECIAL, PROXIMATE, CONSEQUENTIAL, INCIDENTAL, INDIRECT OR EXEMPLARY DAMAGES.

B. If Buyer transfers title to, or leases Products sold hereunder to, or otherwise permits or suffers use by, any third party, Buyer shall obtain from such third party a provision affording Seller and its subcontractors/suppliers the protection of the preceding sentence. Any action against Seller must be brought within 12 months after cause of action accrues.


A. Seller shall not be liable for delays in delivery or failure to perform due directly or indirectly to causes beyond Seller's reasonable control including but not limited to: acts of God; war; terrorism; civil commotion; riots; embargoes; government regulations, orders, instructions or priorities; port congestion; acts of or failure to act on the part of Buyer or its agents/employees; fires; floods; sabotage; nuclear incidents; earthquakes; storms; epidemics; strikes; lockouts or other labor difficulties; shortages of or inability to timely obtain proper labor, materials, components, shipping space or transportation, fuel, supplies or power at current prices; or due to limitations imposed by the extent of availability of Seller’s normal manufacturing facilities.

B. If a delay excused per the above extends for more than 90 days and the parties have not agreed upon a revised basis for continuing providing Products/Services at the end of the delay, including adjustment of the price, then either party (except where delay is caused by Buyer, in which event only Seller) upon thirty (30) days’ notice may terminate the Order with respect to the unexecuted portion of the Products/Services, whereupon Buyer shall promptly pay Seller its reasonable termination charges upon submission of Seller's invoices thereof.


A. Buyer shall not acquire any rights to any software which may be delivered with Products, except as granted in Seller’s standard software license. Any software license granted in connection with Products shall be an interim license, which may be withdrawn, pending payment for Products in full.

B. The purchase of Products shall not include any right to supply of technical information such as drawings or specifications.

C. Proprietary information, including drawings, documents, technical data, reports, software, designs, inventions, and other technical information supplied by Seller in connection herewith (hereinafter called "Data"), shall remain Seller's sole property and shall be held in confidence by Buyer. Data shall not be reproduced, used, or disclosed to others by Buyer without Seller’s prior written consent. Upon completion of Order, Buyer shall promptly return all Data to Seller together with all copies or reprints thereof then in Buyer's possession or control, and Buyer shall thereafter make no future use, either directly or indirectly, of any Data or any information derived therefrom without Seller's prior written consent. The foregoing shall in no way obligate Seller to provide or supply Data.


Seller’s charges for dies, molds, patterns, and the like represent the Buyer’s proportionate cost thereof, it being expressly understood that they remain the property of Seller. Modifications made to dies, molds, patterns, and the like in order to manufacture Products shall be at the discretion of Seller.


A. The rights and obligations of the Buyer and Seller hereunder shall be governed in all respects by the law of the Commonwealth of Pennsylvania, U.S.A. The exclusive forum for adjudication of any disputes shall be the federal or state courts of the Commonwealth of Pennsylvania, and Buyer/Seller hereby consent to personal jurisdiction and venue in such courts in any proceeding. The United Nations Convention on the International Sale of Goods shall not apply.

B. These Terms and Conditions of Sale together with any other terms specifically agreed to in writing by Seller constitute the entire agreement between Buyer and Seller and supersede any prior or contemporaneous representations, agreements, proposals, warranties, or understandings, oral or written, express or implied. No waiver, modification, amendment, rescission or other change to these Terms and Conditions of Sale shall be binding unless specifically agreed to in writing by an authorized representative of Seller.

C. The invalidity of any part hereof shall not affect the validity of the remainder. The failure of Seller to assert any right at any time hereunder shall not prevent Seller's subsequent assertion of the same or different rights.

D. Buyer may not assign this contract without the prior written approval of the Seller.


Products sold hereunder are not intended for application in and shall not be used by Buyer in construction or application of a nuclear installation or in connection with use or handling of nuclear material or for any hazardous activity or critical application, where failure of a single component could cause substantial harm to persons or property, unless Products have been specifically approved for such activity or application. Seller disclaims all liability for loss or damage resulting from such unauthorized use and Buyer shall defend, hold harmless and indemnify Seller against any such liability, whether arising under breach of contract, warranty, tort (regardless of the degree of fault or negligence), strict liability or otherwise. Where Seller approves the application of the Products in a nuclear facility, the Buyer shall, before such use or provision, arrange for insurance or governmental indemnity protecting the Seller against liability and hereby releases and agrees to indemnify the Seller and its suppliers for any nuclear damage, including loss of use, in any manner arising out of a nuclear incident, whether alleged to be due, in whole or in part to the negligence or otherwise of the Seller or its suppliers.


Seller reserves the right to make any changes in the general specifications of the Products which are required for the Products to conform to any statutory requirement.


Only Federal Acquisition Regulation (“FAR”) supplement clauses expressly accepting in writing by Seller shall be included or incorporated by reference herein. Seller shall not be bound by and makes no representation of compliance with any FAR or FAR supplement clauses that Seller shall not have expressly accepted in writing. Buyer agrees that all Products and Services meet the definition of “commercial item” as defined in FAR 2.101.


Given the increased risk of invoice fraud, Buyer should treat any notification to change details of Seller’s bank account with suspicion. Seller will not inform or instruct Buyer to make remittance or money transfers to any other beneficiary, address, or bank account via email. Always verify a request to update records or change bank account information BEFORE implementing a change or completing the payment. Verify any requested changes by speaking to a known Seller’s representative.

Effective Date: JANUARY, 2024